Neues rund um Akustikstoff – und über uns

Monat: August 2018

Damit nichts anbrennt: Akustikstoff FR

Unser neuer Akustikstoff FR ist nichtentflammbar. Wir legen also die Messlatte für schalltransparenten Stoff wieder ein ganzes Stück höher. Obendrein machen wir einen Traum zahlreicher Architekten, Innenarchitekten, Messebauer und ELA-Techniker wahr.

Einen solchen Lautsprecherstoff gab’s bisher nirgends: Flammhemmend, einfach zu verarbeiten und elastisch, mit hervorragenden akustischen und ästhetischen Eigenschaften, auf Abruf in zahlreichen attraktiven Farben verfügbar.  Für uns Grund genug, eine Neuentwicklung zu starten, um die Welt der schalltransparenten Stoffe entscheidend besser und vielfältiger zu machen.

Akustikstoff FR ist nach NFP 92502 als nichtbrennbar (M1) zertifiziert.Das Ergebnis: Akustikstoff FR – vom renommierten französischen Testinstitut FCBA entsprechend der europaweit gültigen EN 13773-1 sowie der deutlich anspruchsvolleren französischen Norm NFP 92503 M1 als nichtentflammbar zertifiziert.

Akustikstoff FR  macht Schluss mit einem altbekannten und lästigen Problem, vor dem vor allem Architekten, Innenarchitekten und Beschallungs- sowie Veranstaltungstechniker regelmäßig standen: Der Einsatz optisch attraktiver, schalltransparenter Stoffe in öffentlich zugänglichen Gebäuden ließ sich bisher so gut wie nicht mit den geltenden Brandschutzvorschriften in Einklang bringen. Schalltransparente, auch optisch ansprechende Stoffe werden nämlich aus naturgemäß leicht entflammbaren Kunststofffasern hergestellt. §19 der Musterbauordnung, die Beherbergungsverordnung, die Versammlungsstättenverordnungen der Länder und bei vielen Bauprojekten auch vertraglich vereinbarte technischen Richtlinien verlangen jedoch auch für textile Materialen eine Zertifizierung nach EN 13773-1, also mindestens schwerentflammbares Material.

Mit Akustikstoff FR steht nun erstmals ein ab Lager in 42 verschiedenen Farben verfügbarer Lautsprecherstoff zur Verfügung, der optimalen vorbeugenden Brandschutz und hervorragende akustischen Eigenschaften vereint. Der nichtentflammbare (M1) Bespannstoff übertrifft die Anforderungen der früher gängigen, in zahlreichen Ausschreibungen immer noch zu findenden DIN 4102-1 B1 (schwerentflammbar) um Längen: Den Testergebnissen des französischen Labors zufolge wäre er in Baustoffklasse A2 einzuordnen. Er ist also etwa so brennbar wie Gipskartonplatten.

Akustikstoff FR ermöglicht sowohl in seiner Funktion als klassischer Lautsprecherstoff als auch bei zahllosen Deko-Anwendungen mit schalltransparentem Stoff optimalen Brandschutz ohne Kompromisse bei der akustischen Transparenz – in Architektur und Innenarchitektur ebenso wie im Messe-, Bühnen- und Ladenbau, in der Werbetechnik, bei Ausstellungen, Konzerten und Events und nicht zuletzt in der Gastronomie.

{Acoustic Cloth 2.0 – Dustproof? Oh yes!

It all started with an enquiry from Nevada: A customer wanted to know whether our acoustic fabric would be dustproof enough to protect a couple of Bose F1 Arrays from exposure to dust during this year’s Burning Man festival. Good question. We didn’t have any  empirical data, as we’d usually focus on sound permeability and translucence (or rather the opposite) in the development of our speaker fabrics. But the question piqued our curiosity and we wanted to come up with a proper solution. We decided to use superfine flour as an imitation of the dust in Black Rock Desert. Not the worst idea: Marc-Antoine from Nevada replied that „superfine wheat flour is a good approximation of Burning Man’s dust.“

Our DIY test setup for dustproofness test of Acoustic Cloth 2.0 from Akustikstoff.comThe core of our test setup consisted of a piece of our stain-resistant and water-repellent Acoustic Cloth 2.0, an empty cardboard box, and  a DIY „flour cannon“ made of a cardboard roll core and several bits and pieces. We pointed the „cannon“ to the speaker cloth at a distance of about 20 cm. Dried pressurised air at about 80 psi from our workshop was used to propel the flour towards the fabric. The measured air speed (and, consequently, the exit velocity of the flour) at a distance of about 10 cm from the cardboard tube was 27 knots (which equals 50 km/h or wind force 6). Not bad, eh?

We wasted the first pack of flour to find that one layer of fabric isn’t sufficient in our view. We weren’t happy with the amount of flour that went through. So we modified the setup and attached two layers of fabric. The distance between the two layers was about 1.5 inches and the frame with the first layer was slightly tilted to prevent the flour particles from building up between the two layers and instead simply drop to the ground. Admittedly a somewhat shaky impromptu installation that wouldn’t meet the requirements for whatever ISO certification, but good enough for our purposes.

dustproofness of Acoustic Cloth 2.0 from Akustikstoff.com proven with a testThe result of this second round made us happy, as there were only very few particles still going through the two layers of speaker fabric. We found just a little dust on the ground of the box, after we’d propelled another full pack of flour towards the front of the construction and finally cleaned both with an air nozzle before opening the box.

We’ve uploaded a video of this test on Youtube, so why not have 90 seconds of fun, watch this bonkers and weird dustproofness test, and judge for yourself.